Product Details
The good weak light performance(morning,evening and cloudy day) has been tested and approved by professional third-party.
Guarantee from ±3% as power tolerance.
100% EL test before and after lamination, and finished products EL test, providing higher quality assurance.
For a period of twenty-five (25)years commencing on the Warranty Start Date, loss of power output of the nominal power output measured at Standard Test Conditions (STC) for the Product(s) shall not exceed:
1.Within a period of one (1) year from the Warranty Start Date, the module output will be at least 97% of the rated power output specified in the original product label.
2.During the next twenty-five (25) years, the module power output will degrade no more than 0.708% per year of the rated power output specified in the original product label. Therefore, at the end of the warranty period, the guaranteed module power outputwill be at least 80.008% of the rated power output specified in the original product label.
I-V Curves |
|
I-V Curves of PV module JYxxxM60 at different light power |
Electrical Characteristics |
Solar-cells: |
Mono-Crystalline 156.75×156.75mm |
60pcs (6×10) —— 5 bus bars |
Max-power [W] |
280 |
285 |
Power tolerance |
±3% |
Voltage at Pmax (Vmp) [V] |
31.8 |
32.1 |
Current at Pmax (Imp) [A] |
8.81 |
8.91 |
Open-circuit voltage (Voc) [V] |
38.6±3% |
38.7±3% |
Short-circuit current (Isc) [A] |
9.49±5% |
9.51±5% |
Max-system voltage (VDC) [V] |
1000 |
No. of bypass diodes |
3 |
Max. series fuse [A] |
15 |
Temperature coefficient of pmax |
-0.395%/°C |
Temperature coefficient of voc |
-0.317%/°C |
Temperature coefficient of isc |
0.0577%/°C |
Nominal module operating temperature(NMOT) |
45±2°C |
*STC Conditions (1000W/m²;1.5AM and 25°C cell temperature) |
Mechanical Characteristics |
Cable type, diameter and length |
Φ=4mm², L=900±5mm |
Type of connector |
PV-CO01, PV-CO02, PV-JK03M-1B, PV-JK03M-2B,
PV-KST4/xy-UR(male)&PV-KBT4/xy-UR(female),
PV-KST4-EV02/XY(male)&PV-KBT4-EV02/XY(female)
|
Dimension A×B×C |
1640×992×35/40/45mm |
Weight |
17.7kg/17.9kg/18.2kg |
No. of Draining holes in frame |
16 |
Construction |
Glass:Tempered glass 3.2mm Encapsulation:EVA Back side:White |
Junction box |
IP67 Rated |
Frame |
Clear anodized aluminium alloy type 6063T5 frame |
|
Qualification Test Parameters |
Dielectric insulation voltage |
6000VDC max |
Operating Temperature |
-40℃~+85℃ |
Design load |
3600Pa for positive (downward) and 1600Pa for negative (upward) |
Safety factor ym |
1.5 |
Hailstone impact |
25mm(1inch) at 23m/s(52mph) |
Fire Safety Class |
Class C |
Packaging configuration |
1640×992×35mm 28pcs/box |
Loading capacity |
784pcs/40HQ 168pcs/20GP |
Packaging configuration |
1640×992×40mm 26pcs/box |
Loading capacity |
728pcs/40HQ 156pcs/20GP |
Packaging configuration |
1640×992×45mm 23pcs/box |
Loading capacity |
644pcs/40HQ 138pcs/20GP |
http://www.ecomattersenergy.com/